– When the setting is changed, the server blade will be restarted.
– When the setting is not changed, the server blade remains running.
iSCSI Initiator settings
Use LOM(ServerEngines BladeEngine3) and iSCSISelect Utility in Emulex
10Gb iSCSI initiator BIOS on 10Gb 4-port converged network mezzanine card
for settings. Set Initiator by iSCSISelect Utility.
Starting iSCSISelect Utility
1
Start the remote console, and then click Power > Power On to power on
.
a server blade.
2
When Press <Ctrl> <S> for iSCSISelect(TM) Utility is displayed in
.
the bottom of the window, press Ctrl + S.
3
iSCSISelect Utility starts.
.
iSCSI settings
Hitachi Compute Blade 500 Series EFI User's Guide
9-5