Setting Virtual Drives; Virtual Drive Setting With Windows Os - Hitachi Compute Blade 500 Series User Manual

6 Drive Management > Select Virtual Drive Operations > Success message
.
appears. With OK selected, press Enter.
7 Rebuild is re-executed. Then, Drive Management window appears.
.

Setting virtual drives

This section describes how to add virtual drives after configuring and
initializing virtual drives. If with the following condition, make sure to add
virtual drives.
Condition: When restore the OS using backup data or ServerConductor/
Deployment Manager after configuring a virtual drive.
Note: If with the condition above, the virtual drive may not work properly
without the following procedure. Thus, make sure to execute the following
procedure if with the condition.

Virtual drive setting with Windows OS

This subsection describes how to set virtual drives on Windows OS.
1 Restore the OS using the backup data, start the OS, and log on as
.
Administrator.
2 Insert Driver Kit for Windows Server 2012 DVD into the CD/DVD drive,
.
and check Mapped on the following Virtual Media Session window.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
6-53