Hitachi Compute Blade 500 Series User Manual page 33

Boot Manager
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Menu items
Primary Boot Sequence
Add Boot Option
Delete Boot Option
Change Boot Order
Secondary (WOL) Boot Sequence
Add WOL Boot
Option
Delete WOL Boot
Option
Change WOL Boot
Order
Boot Other
Boot From File
Boot From Device
UEFI Shell
Select Next One-
Time Boot
System
Boot Modes
Reset System
Tip: If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
Table 2-12 Boot Manager menu items
Adds a device or file system to the boot option.
See Add Boot Option sub menu on page
Deletes a device or file system from the boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page
Changes boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page
Adds a device or file system to the WOL boot option.
See Add Boot Option sub menu on page
Deletes a device or file system from the WOL boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page
Change the WOL boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page
Boots up from a file that you specify.
Boots up from a device that you specify. See
sub menu on page 2-16
Boots UEFI Shell.
Tries to boot from a specific target only on the next boot.
Displays a window to change boot modes.
See Boot Modes sub menu on page 2-17
Restart the system.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
2-14.
2-14.
2-15.
2-14.
2-14.
2-15.
Boot From Device
for details.
for details.
2-13