Honda 2004 Odyssey Service Manual page 2362

15. Disconnect SRS floor subharness 3P connector
C558 from the left side wire harness.
16. Check resistance between the No. 2 and No. 3
terminals of left side wire harness 3P connector.
There should be 0 1.0
LEFT SIDE WIRE HARNESS 3P CONNECTOR
GRN/RED
Wire side of female terminals
Is the resistance as specif ied?
YES Open in the SRS floor subharness; replace
the SRS floor subharness.
NO Go to step 17.
.
GRN/YEL
17. Disconnect the left side wire harness 12P connector
C552 from the driver's seat wire harness (with
power seat) or the left side wire harness 2P
connector C559 from the driver's seat position
sensor subharness (without power seat).
18. Check resistance between the No. 5 and No. 12
terminals of the driver's seat wire harness 12P
connector (with power seat) or between the No. 1
and No. 2 terminals of the driver's seat position
sensor subharness 2P connector (without power
seat). There should be 0 1.0
DRIVER'S SEAT WIRE HARNESS 12P CONNECTOR
(WITH POWER SEAT)
Terminal side of male terminals
DRIVER'S SEAT POSITION SENSOR SUBHARNESS
2P CONNECTOR
(WITHOUT POWER SEAT)
WHT
Terminal side of male terminals
Is the resistance as specif ied?
YES Open in the left side wire harness; replace
the left side wire harness.
NO Open in the driver's seat wire harness (with
power seat) or driver's seat position sensor
subharness (without power seat); replace the faulty
harness.
.
WHT
BLK
BLK
23-297