SRS
Airbag Disposal (cont'd)
Side Airbag ('02-04 Models)
6. Disconnect the 2P connector between the side
airbag (A) and the floor wire harness (B).
A
B
Seat belt tensioner
7. Disconnect the 2P connector between the seat belt
tensioner (A) and floor wire harness (B).
23-374
8. Pull the seat belt out all the way and cut it.
9. Cut off each connector, strip the ends of the wires,
and connect the deployment tool alligator clips (A)
to the wires. Place the deployment tool at least 30
feet (10 meters) away from the vehicle.
'02-03 Models:
NOTE: The driver's airbag and the front passenger's
airbag each have four wires, two yellow and two
red. Twist each pair of unlike colored wires
together, and connect an alligator clip to each pair.
A
A
B
07HAZ-SG00500
A
A
A