Honda 2004 Odyssey Service Manual page 2339

SRS
DTC Troubleshooting (cont'd)
7. Connect the special tool (jumper connector) to the
right side wire harness 2P connector.
8. Disconnect the both seat belt tensioner connectors
from the side wire harness (A).
9. Disconnect SRS unit connector B (28P) from the
SRS unit.
23-274
10. Check resistance between the No. 25 and No. 26
terminals of SRS unit connector B (28P). There
should be 0 1.0
A
Is the resistance as specif ied?
YES
or SRS unit; replace the front passenger's side
impact sensor (see page 23-386). If the problem is
still present, replace the SRS unit
(see page 23-384).
B
NO
.
SRS UNIT CONNECTOR B (28P)
RED/WHT
Wire side of female terminals
Faulty front passenger's side impact sensor
Go to step 11.
PNK