7. Disconnect the SRS main harness 2P connector (A)
from the cable reel 2P connector (B), then
disconnect the dashboard wire harness 4P
connector (C) from the cable reel (D).
B
A
8. Remove the screws (A) from the cable reel, then
remove the cable reel from the column.
Removal ('02-04 Models)
D
C
A
1. Make sure the front wheels are aligned straight
ahead.
2. Disconnect the battery negative cable, and wait at
least 3 minutes.
3. Remove the driver's airbag (see page 23-368).
4. Disconnect the connectors (A) from the cruise
control set/resume switch, radio remote switch,
and horn switch, then remove the steering wheel
bolt (B).
5. Remove the steering wheel with a steering wheel
puller (see step 3 on page 17-22). Do not tap on the
steering wheel or steering column shaft when
removing the steering wheel.
B
A
(cont'd)
23-377