Honda 2004 Odyssey Service Manual page 2358

7. Unbuckle the front passenger's seat belt.
• Check resistance between the No. 1 and No. 2
terminals of the front passenger's seat belt
buckle switch 3P connector. There should be
0 1 .
• Check resistance between the No. 1 and No. 3
terminals of the same connector. There should
be an open circuit, or at least 1 M .
FRONT PASSENGER'S SEAT BELT
BUCKLE SWITCH 3P CONNECTOR
BLK
Terminal side of male terminals
BLK
Terminal side of male terminals
Is the resistance as specif ied?
YES Go to step 8.
NO Replace the front passenger's seat belt buckle
assembly, then clear the DTC.
GRY
BLU
8. Disconnect the battery negative cable and wait for
3 minuites.
9. Disconnect both seat belt tensioner 2P connectors
from the side wire harness (A).
A
(cont'd)
23-293