Enabling Energywise On The Cisco Unified Ip Phone 6901 And 6911 - Cisco 6901 Administration Manual

Enabling EnergyWise on the Cisco Unified IP Phone 6901 and 6911

In the CCMUser Parameters area, specify whether a parameter appears on the User Options web pages
Step 2
by choosing one of these values from the Parameter Value drop-down list for the parameter:
•
•
•
•
•
Enabling EnergyWise on the Cisco Unified IP Phone 6901 and
6911
To reduce power consumption, you can configure the phone to sleep (power down) and wake (power up)
if your system includes an EnergyWise controller (for example, a Cisco Switch with the EnergyWise
feature enabled).
You configure settings in Cisco Unified Communications Manager to enable EnergyWise and configure
sleep and wake times. These parameters are closely tied to the phone display configuration parameters.
When EnergyWise is enabled and a sleep time is set, the phone sends a request to the switch to wake it
up at the configured time. The switch sends back either an acceptance or a rejection of the request. If the
switch rejects the request or if the switch does not reply, the phone does not power down. If the switch
accepts the request, the idle phone goes to sleep, reducing its power consumption to a predetermined
level. A phone that is not idle sets an idle timer, and goes to sleep after the timer expires.
At the scheduled wake time, the system restores power to the phone, waking it up.
Table 5-2
settings. You configure these fields in Cisco Unified Communications Manager in the Product Specific
configuration window, by choosing Device > Phone.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
5-12
True—Option displays on the User Options web pages (default except for Show Ring Settings, and
Show Call Forwarding).
False—Option does not display on the User Options web pages.
Show All Settings—All call forward settings display on the User Options web pages (default).
Hide All Settings—No call forward settings display on the User Options web pages.
Show Only Call Forward All—Only call forward all calls displays on the User Options web pages.
explains the Cisco Unified Communications Manager fields that control the EnergyWise
Chapter 5 Configuring Features, Templates, Services, and Users
OL-24582-01