Reducing Power Consumption On The Cisco Unified Ip Phone 6901 And 6911; Terminology Differences - Cisco 6901 Administration Manual

Reducing Power Consumption on the Cisco Unified IP Phone 6901 and 6911

Table 1-9 Installation Checklist for the Cisco Unified IP Phone 6901 and 6911 (continued)
Task Purpose
If you are configuring the network settings on the phone, you
4.
can set up an IP address for the phone by either using DHCP or
manually entering an IP address.
Using DHCP—Verify that DHCP is enabled with the IVR. You
can set an alternate TFTP by entering the IP address for the
TFTP when prompted by the IVR.
Note Consult with the network administrator to determine
whether you need to assign an alternative TFTP server
instead of using the TFTP server assigned by DHCP.
Without DHCP—Verify that DHCP is disabled with the IVR.
You must then configure the IP address, subnet mask, TFTP
server, and default router locally by using the phone's IVR.
5. Set up security on the phone.
Provides protection against data tampering threats and identity
theft of phones.
6. Make calls with the Cisco Unified IP Phone.
Verifies that the phone and features work correctly.
7. Provide information to end users about how to use their phones
and how to configure their phone options.
Ensures that users have adequate information to successfully
use their Cisco Unified IP Phones.
Reducing Power Consumption on the Cisco Unified IP Phone
6901 and 6911
The Cisco Unified IP Phone 6900 Series supports Cisco EnergyWise (EW) (also known as Power Save
Plus). When your network contains an EnergyWise controller, you can configure these phones to sleep
(power down) and wake (power up) on a schedule to reduce your power consumption.
You set up each phone to enable or disable the EnergyWise settings. If EnergyWise is enabled, you
configure a sleep and wake time, as well as other parameters. These parameters are sent to the phone as
part of the phone configuration XML file.

Terminology Differences

Table 1-10
•
•
•
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
1-22
highlights some of the important differences in terminology that is used in these documents:
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager
(SCCP and SIP)
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications
Manager (SCCP and SIP)
Cisco Unified Communications Manager Administration Guide
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
See the "Configuring Startup Network
Settings" section on page
See the "Configuring Settings on the Cisco
Unified IP Phone" section on page
See the "Configuring Security on the Cisco
Unified IP Phone" section on page
Refer to Cisco Unified IP Phone 6901 and 6911
User Guide for more information.
See Appendix A, "Providing Information to
Users Via a Website."
3-9.
4-1.
3-10.
OL-24582-01