Checking Static Ip Address Settings; Verifying The Voice Vlan Configuration; Verifying That The Phones Have Not Been Intentionally Reset; Eliminating Dns Or Other Connectivity Errors - Cisco 6901 Administration Manual

Chapter 7 Troubleshooting and Maintenance

Checking Static IP Address Settings

If the phone has been assigned a static IP address, verify that you have entered the correct settings. See
the

Verifying the Voice VLAN Configuration

If the Cisco Unified IP Phone appears to reset during heavy network usage (for example, following
extensive web surfing on a computer connected to the same switch as the phone), it is likely that you do
not have a voice VLAN configured.
Isolating the phones on a separate auxiliary VLAN increases the quality of the voice traffic. See the
"Understanding How the Cisco Unified IP Phone 6911 Interacts with the VLAN" section on page 2-2
for details.

Verifying that the Phones Have Not Been Intentionally Reset

If you are not the only administrator with access to Cisco Unified Communications Manager, you should
verify that no one else has intentionally reset the phones.
You can check whether a Cisco Unified IP Phone received a command from Cisco Unified
Communications Manager to reset by pressing the Applications button on the phone and choosing
Administrator Settings > Status > Network Statistics. If the phone was recently reset, one of these
messages appears:
•
•

Eliminating DNS or Other Connectivity Errors

If the phone continues to reset, follow these steps to eliminate DNS or other connectivity errors:
Procedure
Use the Reset Settings menu to reset phone settings to their default values. See the
Step 1
Restoring the Cisco Unified IP Phone" section on page 7-10
Modify DHCP and IP settings:
Step 2
a.
b.
c.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
"Configuring Settings on the Cisco Unified IP Phone" section on page 4-1
Reset-Reset—Phone closed due to receiving a Reset/Reset from Cisco Unified Communications
Manager Administration.
Reset-Restart—Phone closed due to receiving a Reset/Restart from Cisco Unified Communications
Manager Administration.
Disable DHCP. See the "Configuring Settings on the Cisco Unified IP Phone" section on page 4-1
for instructions.
Assign static IP values to the phone. See the
section on page 4-1 for instructions. Use the same default router setting used for other functioning
Cisco Unified IP Phones.
Assign a TFTP server. See the
page 4-1 for instructions. Use the same TFTP server used for other functioning Cisco Unified IP
Phones.
for details.
"Configuring Settings on the Cisco Unified IP Phone"
"Configuring Settings on the Cisco Unified IP Phone" section on
Cisco Unified IP Phone Resets Unexpectedly
for more information.
"Resetting or
7-7