Cisco 6901 Administration Manual page 71

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Private Line The Cisco Unified Communications Manager
Automated Ringdown administrator can configure a phone number that
(PLAR) the Cisco Unified IP Phone dials as soon as the
handset goes off-hook. This can be useful for
phones that are designated for calling emergency
or "hotline" numbers.
Redial Allows users to call the most recently dialed phone
number by pressing the Redial button.
Remote Port Allows the administrator to configure the speed
Configuration and duplex function of the phone Ethernet ports
remotely by using Cisco Unified CM
Administration. This enhances the performance for
large deployments with specific port settings.
Note
Shared Line Allows a user to have multiple phones that share
the same phone number or allows a user to share a
phone number with a coworker.
Monitoring and Allows a supervisor to monitor an active call
Recording silently. The supervisor cannot be heard by either
party on the call. The user may receive an audible
(Cisco Unified IP
alert during a call when it is being monitored.
Phone 6911 only)
Callers may also receive an audible alert to
indicate that the call is being monitored. The
connected parties may also receive an audible alert
that indicates the call is secure and is being
monitored.
Speed Dialing Dials a specified number that has been previously
stored.
(Cisco Unified IP
Phone 6911 only) You configure this feature on the Cisco Unified
Communications Manager. The users access speed
dialing using the Feature key and the Feature Code.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
If the ports are configured for Remote Port
Configuration in Cisco Unified CM, the
data cannot be changed on the phone.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, go to the
Number Configuration"
Unified Communications Manager
Administration Guide.
Requires no configuration.
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the appropriate
IP Phone, and scroll to the Product Specific
Configuration Layout pane (Switch Port
Remote Configuration or PC Port Remote
Configuration).
To configure the setting on multiple phones
simultaneously, configure the remote
configuration in either Enterprise Phone
Configuration (System > Enterprise Phone
Configuration) or Common Phone Profile
Configuration (Device > Device Settings >
Common Phone Profile.
(Switch Port Remote Configuration or PC Port
Remote Configuration)
For more information, go to the
"Understanding Directory
in the Cisco Unified Communications
Manager System Guide.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Monitoring and
Recording" chapter.
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide,
Phone Configuration"
• Cisco Unified Communications Manager
System Guide, "Cisco Unified IP
chapter.
"Directory
chapter in the Cisco
Numbers" chapter
"Cisco Unified IP
chapter.
Phone"
5-7