Accessing The Phone Configuration Settings; Accessing The Ivr And Configuring Your Phone Settings - Cisco 6901 Administration Manual

Unified ip phone communications manager 8.6 (sccp and sip)
Hide thumbs Also See for 6901:
Table of Contents

Advertisement

Accessing the Phone Configuration Settings

Table 4-1
Option
Subnet Mask
Default Router 1
TFTP Server
802.1 xSecurity
IPv6 Network Settings
DHCPv6
IPv6 Default Router 1
IPv6 Address
IPv6 Prefix Length
IPv6 TFTP Server
Accessing the Phone Configuration Settings
You can change the PIN of the IVR by navigating to Device > Device Settings > Common Phone
Profile, and specifying a password for the Local Phone Unlock Password field in the Common Phone
Profile Configuration page.
When there is no User ID or PIN associated with a phone, the phone uses a default PIN of 24726.
Note
Related Topics

Accessing the IVR and Configuring Your Phone Settings

To access the IVR and configure your phone settings, follow these steps:
You can change the PIN by using the Local Phone Unlock Password in the Common Phone Profile
Note
Configuration page of the Cisco Unified CM Administration web page.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-2
Network Menu Options (continued)
Description
Subnet mask used by the phone.
Default router used by the phone (Default Router 1).
Primary Trivial File Transfer Protocol (TFTP) server used by the phone. If
you are not using DHCP in your network or you want to change this server,
you must assign the TFTP Server.
Indicates whether the phone has 802.1x security enabled or disabled.
Dynamic Host Configuration Protocol (DHCP) automatically assigns IPv6
address to devices when you connect them to the network. Cisco Unified IP
Phones enable DHCP by default.
Default router used by the phone (Default Router 1).
IPv6 address of the phone. The IPv6 address is a 128 bit address.
Subnet prefix length that is used by the phone. The subnet prefix length is
a decimal value from 1-128, that specifies the portion of the IPv6 address
that comprises the subnet.
Indicates whether the phone is using the IPv6 Trivial File Transfer Protocol
(TFTP) server.
Configuring Settings on the Cisco Unified IP Phone, page 4-1
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
OL-24582-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6911

Table of Contents