Cisco 6901 Administration Manual page 23

Chapter 1 An Overview of the Cisco Unified IP Phone
If you configure security-related settings in Cisco Unified Communications Manager, the phone
configuration file will contain sensitive information. To ensure the privacy of a configuration file, you
must configure it for encryption. For detailed information, refer to the "Configuring Encrypted Phone
Configuration Files" chapter in Cisco Unified Communications Manager Security Guide.
Table 1-4
Table 1-4 Cisco Unified IP Phone and Cisco Unified Communications Manager Security Topics
Topic
Detailed explanation of security, including set up,
configuration, and troubleshooting information for Cisco
Unified Communications Manager and Cisco Unified IP
Phones
Security features supported on the Cisco Unified IP Phone See the
Viewing a security profile name
Identifying phone calls for which security is implemented
TLS connection
Security and the phone startup process
Security and phone configuration files
Disabling access to a phone's web pages
Troubleshooting
Deleting the CTL file from the phone
Resetting or restoring the phone
802.1X Authentication for Cisco Unified IP Phones
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
shows where you can find additional information about security in this and other documents.
Understanding Security Features for Cisco Unified IP Phones
Reference
Refer to the Troubleshooting Guide for Cisco Unified
Communications Manager
"Overview of Supported Security Features" section on
page 1-12
See the Table 1-5 for an overview of the security features
supported by the Cisco Unified IP Phone 6901 and 6911. For
more information about these features and about Cisco Unified
Communications Manager and Cisco Unified IP Phone
security, refer to the Cisco Unified Communications Manager
Security Guide.
See the "Identifying Authenticated, Encrypted, and Protected
Phone Calls" section on page 1-14
• See the "What Networking Protocols are Used?" section
on page 1-6
See the "Adding Phones to the Cisco Unified
•
Communications Manager Database" section on page 2-7
See the "Understanding the Phone Startup Process" section on
page 2-6
See the "Adding Phones to the Cisco Unified Communications
Manager Database" section on page 2-7
See the "Disabling and Enabling Web Page Access" section on
page 6-2
• See the "Troubleshooting and Maintenance" section on
page 7-1
• Refer to the Troubleshooting Guide for Cisco Unified
Communications Manager
See the "Resetting or Restoring the Cisco Unified IP Phone"
section on page 7-10
See the "Resetting or Restoring the Cisco Unified IP Phone"
section on page 7-10
See these sections:
• "Supporting 802.1X Authentication on Cisco Unified IP
Phones" section on page 1-16
• "Troubleshooting and Maintenance" section on page 7-1
1-11