Appendix; Installing The Wall Mount For The Cisco Unified Ip Phone 6901 And 6911; Installing A Wall Mount For The Cisco Unified Ip Phone 6901 - Cisco 6901 Administration Manual

Installing the Wall Mount for the Cisco Unified
IP Phone 6901 and 6911
This appendix contains information on installing the wall mount for use with the Cisco Unified IP Phone
6901 and 6911 phones.

Installing a Wall Mount for the Cisco Unified IP Phone 6901

The following section describes how to install the Wall Mount plate for use with the
Cisco Unified IP Phone 6901.
Cisco recommends that you use the Leviton Wall Mount plate (Leviton type number: 4108W-0SP) for
mounting the Cisco Unified IP Phone 6901. The wall mount plate must be ordered separately from the
phone.
Figure E-1
the Leviton Wall Mount plate.
Figure E-1
4
1
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
shows a list of items required to mount the Cisco Unified IP Phone 6901 on the wall using
Leviton Wall Mount Plate
A
6
8
7
B
1
RJ45 Connector
A P P E N D I X
2
2
Leviton Wall Mount Plate
E
E-1