Installing a Wall Mount for the Cisco Unified IP Phone 6911
Attach the phone bracket to the IP Phone
Step 2
Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
a.
cords from the base of the phone.
Remove the label covers that are concealing the screw holes.
b.
Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone's
c.
ports should be accessible through the holes in the bracket.
d.
Secure the phone bracket to the IP Phone with the Phillips-head screws.
Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
e.
clips incorporated into the phone body.
Figure E-9
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
E-10
Appendix E
(Figure
Attaching the Phone Bracket
Screw holes
Installing the Wall Mount for the Cisco Unified IP Phone 6901 and 6911
E-9).
Slot for
mounting tabs
OL-24582-01