Cable Specifications; Appendix C Technical Specification; Physical And Operating Environment Specifications - Cisco 6901 Administration Manual

Cable Specifications

Table C-1 Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6901 (continued)
Specification
Cables
Distance Requirements
Table C-2
6911.
Table C-2 Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6911
Specification
Operating temperature
Operating relative humidity
Storage temperature
Height
Width
Depth
Weight
Power
Cables
Distance Requirements
Cable Specifications
•
•
•
•
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
C-2
Value or Range
Category 3/5/5e for 10-Mbps cables with four pairs
Category 5/5e for 100-Mbps cables with four pairs
Cables have four pairs of wires for a total of eight conductors.
Note
As supported by the Ethernet Specification, it is assumed that the maximum cable length
between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).
shows the physical and operating environment specifications for the Cisco Unified IP Phone
Value or Range
23° to 113°F (-5° to 45°C)
10% to 90% (non-condensing)
-13° to 158°F (–25° to 70°C)
8.07 in. (20.5 cm)
7.4 in. (18.8 cm)
5.76 in. (14.64 cm)—Excluding the handset
• 1.53 lb (697 g)—Black handset phone
• 1.65 lb (750.3 g)—White handset phone
100-240 VAC, 50-60 Hz, 0.5 A—When using the AC adapter
•
48 VDC, 0.2 A—When using the in-line power over the network cable
•
Category 3/5/5e for 10-Mbps cables with 4 pairs
Category 5/5e for 100-Mbps cables with 4 pairs
Cables have 4 pairs of wires for a total of 8 conductors.
Note
As supported by the Ethernet Specification, it is assumed that the maximum cable length
between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).
RJ-9 jack (4-conductor) for handset connection.
RJ-45 jack for the LAN 10/100BaseT connection (labeled 10/100 SW on the Cisco Unified
IP Phone 6901 and 6911).
RJ-45 jack for a second 10/100BaseT compliant connection (labeled 10/100 PC on the
Cisco Unified IP Phone 6911).
48-volt power connector.
Appendix C Technical Specifications
OL-24582-01