Dial Plans; System Administration; Reboot And Restart; Factory Reset - Linksys 900 Series Administrator's Manual

System Administration

Dial Plans

ParName
Default
The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a
number from 1 to 4.
System Administration
This section describes features and operations required for administering and maintaining the
basic function of the SPA900 Series IP phone. It includes the following topics:
•
•
•
•
•
•
•
•

Reboot and Restart

Reboot cold boots the phone and restart DHCP. Restart warm boots the phone, without
restarting DHCP. Both options require the user to confirm before proceeding.

Factory Reset

Factory reset resets all parameters to default value. The personal directory and call logs are also
cleared. This option require the user to confirm before proceeding.

Password Protection

The user can configure a password to the phone to protect against access to the certain options.
Linksys 900 Series IP Phone Administrator Guide
3-30
Dial_Plan[n] for Each Line n
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx |
1[2-9]xx[2-9]xxxxxx | 011x. )
Reboot and Restart, page 3-30
Factory Reset, page 3-30
Password Protection, page 3-30
Managing the Time/Date, page 3-31
Daylight Saving Time, page 3-31
Using Star Codes to Activate/Deactivate Services, page 3-32
Disabling Services, page 3-34
Error and Log Reporting, page 3-34
Chapter 3 Managing Linksys 900 Series IP Phones
Document Version 3.1