Linksys 900 Series Administrator's Manual page 124

Regional Tab
Blind Transfer Code
Call Back Act Code
Call Back Deact Code
Call Back Busy Act Code
Cfwd All Act Code
Cfwd All Deact Code
Cfwd Busy Act Code
Cfwd Busy Deact Code
Cfwd No Ans Act Code
Cfwd No Ans Deact Code
Cfwd Last Act Code
Cfwd Last Deact Code
Block Last Act Code
Block Last Deact Code
Accept Last Act Code
Accept Last Deact Code
Linksys 900 Series IP Phone Administrator Guide
5-22
Begins a blind transfer of the current call to the extension specified after the activation
code.
The default is *98.
Starts a callback when the last outbound call is not busy.
The default is *66.
Cancels a callback.
The default is *86.
Starts a callback when the last outbound call is busy. (Not in PAP2T)
The default is *05
Forwards all calls to the extension specified after the activation code.
The default is *72.
Cancels call forwarding of all calls.
The default is *73.
Forwards busy calls to the extension specified after the activation code.
The default is *90.
Cancels call forwarding of busy calls.
The default is *91.
Forwards no-answer calls to the extension specified after the activation code.
The default is *92.
Cancels call forwarding of no-answer calls.
The default is *93.
Forwards the last inbound or outbound calls to the extension specified after the activation
code.
The default is *63.
Cancels call forwarding of the last inbound or outbound calls.
The default is *83.
Blocks the last inbound call.
The default is *60.
Cancels blocking of the last inbound call.
The default is *80.
Accepts the last outbound call. It lets the call ring through when do not disturb or call
forwarding of all calls are enabled.
The default is *64.
Cancels the code to accept the last outbound call.
The default is *84.
Chapter 5 900 Series phone Field Reference
Document Version 3.1