Using Soft Keys - Linksys 900 Series Administrator's Manual

Chapter 3 Managing Linksys 900 Series IP Phones
Figure 3-2
To use the shortcut to an option, press the Menu (Setup) button and type the number assigned
to the option. The option does not have to appear on the LCD to use the shortcut. To select an
option with a two-digit shortcut, press the second number within two seconds of the first
number.

Using Soft Keys

The LCD can display up to four options at one time. You can scroll through a longer list of
options by pressing the Navigation button up or down. Pressing down or up when at the bottom
or top of a list displays the first or last item in the list.
Typically, when you select monitoring options, only the Cancel soft key is available.
summarizes the general soft key labels that appear on the LCD display.
Table 3-1
Label
cfwd
dir
dnd
grPick
lcr
park
Document Version 3.1
Telephone Keypad
General LCD Display Soft Key Labels
Description
Forwards calls, with one of four options: All, When the line
is busy, When there is no answer, or When there is no answer
after a time delay.
Accesses the phone directory.
(Do not disturb) Sends incoming calls to voicemail, or gives
a busy signal if voicemail is not available.
Picks up a call from an extension outside the group.
(Last call return) Dials the last call received.
Parks a call at a designated call park number. The call is active
until it is unparked, or the caller disconnects (must be enabled
before use).
Voicemail
Call hold
Menu (Setup)
Microphone mute
Headset
Volume control
Speaker
Numeric keypad
Linksys 900 Series IP Phone Administrator Guide
Using the LCD Display
Table 3-1
3-3