Supplementary Services - Linksys 900 Series Administrator's Manual

Chapter 5 900 Series phone Field Reference
Field
Local Active LED
Remote Active LED
Local Held LED
Remote Held LED
Disabled LED
Register Failed LED
Registering LED
Call Back Active LED

Supplementary Services

Enable or disable the corresponding supplementary services on the phone. The default value for these
parameters is yes.
Field
Conference Serv
Attn Transfer Serv
Blind Transfer Serv
DND (Do Not Disturb) Serv
Block ANC (Anonymous Call)
Serv
Call Back Serv
Block CID (Caller ID) Serv
Secure Call Serv
CFWD All Serv
Document Version 3.1
Description
LED pattern during the Local Active state, where the call appearance is engaged in an
active call. Leaving this entry blank indicates the default value of c=r.
LED pattern during the Remote Active state, where another station is engaged in an active
call on this shared call appearance. Not applicable is this call appearance is not shared.
Leaving this entry blank indicates the default value of c=r;p=d.
LED pattern during the Local Held state, where the call appearance is held by this station.
Leaving this entry blank indicates the default value of c=r;p=s.
LED pattern during the Remote Held state, where another station has placed this call
appearance on hold. Not applicable if the call appearance is not shared. Leaving this entry
blank indicates the default value of c=4,p=s.
LED pattern when the Call Appearance is disabled (not available for any incoming or
outgoing call). Leaving this entry blank indicates the default value of c=o.
LED pattern when the corresponding extension has failed to register with the proxy
server. Leaving this entry blank indicates the default value of c=a.
LED Pattern when the corresponding extension is trying to register with the proxy server.
Leaving this entry blank indicates the default value of c=r;p=s.
Call Back operation is currently active on this call appearance is not shared. Leaving this
entry blank indicates the default value of c=r;p=s.
Description
Enable/disable Three way conference service
Enable/disable attended-call-transfer service
Enable/disable blind-call-transfer service
Enable/disable do-not-disturb service
Enable/disable block-anonymous-call service
Enable/disable call-back (a.k.a. repeating dialing) service
Enable/disable blocking outbound Caller-ID service
Enable/disable secure-call service
Enable/disable call-forward-all service
Linksys 900 Series IP Phone Administrator Guide
Phone Tab
5-33