Host Name; Domain; Current Netmask; Current Gateway - Linksys 900 Series Administrator's Manual

Chapter 4 LCD Command Reference Guide
•
•

9.3 Host Name

Shortcut: Menu, 9, 3 save
The Host Name is set by the administrator. The user cannot change the setting.To view the Host Name,
press 3 from the Network menu, or scroll down to Host Name and press the select soft key.

9.4 Domain

Shortcut: Menu, 9, 4 save
The Domain Name displays the name of the domain in which the phone is operating and is not user
configurable. To view the Domain, press 4 from the Network menu, or scroll down to highlight Domain
and press select.

9.5 Current NetMask

Shortcut: Menu, 9, 5 save
To view the Current NetMask, press 5 from the Network menu, or scroll down to highlight NetMask and
press the select soft key. The Current NetMask is set in one of the following ways:
•
•

9.6 Current Gateway

Shortcut: Menu, 9, 6 save
To view the Current Gateway, press 6 on the Network menu, or scroll down to highlight Current
Gateway and press the select soft key.
The Current Gateway is set in one of the following ways:
•
•

9.7 Enable Web Server

Shortcut: Menu, 9, 7, y/n, ok
To view the status of the Web Server, press 7 from the Network menu, or scroll down to highlight
Enable Web Server and press the select soft key. To enable or disable the Web Server, press the edit
soft key. Press the y/n soft key to toggle between Yes to No and press ok.
Document Version 3.1
Receive the address from a DHCP server by enabling DHCP (Option 9.1)
Manually set the address using the Non DHCP IP Address option (Option 9.8)
Receive the address from a DHCP server by enabling DHCP (option 9.1)
Manually set the address using the Non DHCP Subnet Mask option (Option 9.9)
Receive the address from a DHCP server (the user cannot edit it)
Manually set the address using the Non DHCP Default Route option (Option 9.10)
Linksys 900 Series IP Phone Administrator Guide
9 Network
4-9