Distinctive Ring Patterns - Linksys 900 Series Administrator's Manual

Chapter 5 900 Series phone Field Reference
SIT1 Tone
SIT2 Tone
SIT3 Tone
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Holding Tone
Conference Tone
Secure Call Indication Tone
Page Tone
Feature Invocation Tone

Distinctive Ring Patterns

Field
Ring1 Cadence
Document Version 3.1
Alternative to the Reorder Tone played when an error occurs as a caller makes an
outbound call. The RSC to trigger this tone is configurable on the SIP screen.
The default is 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an error occurs as a caller makes an
outbound call. The RSC to trigger this tone is configurable on the SIP screen.
The default is 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an error occurs as a caller makes an
outbound call. The RSC to trigger this tone is configurable on the SIP screen.
The default is 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
This is an alternative to the Reorder Tone played when an error occurs as a caller makes
an outbound call. The RSC to trigger this tone is configurable on the SIP screen.
The default is 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0).
Played instead of the Dial Tone when there are unheard messages in the caller's mailbox.
The default is 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2).
Played when all calls are forwarded.
The default is 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2).
Informs the local caller that the far end has placed the call on hold.
The default is 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1).
Played to all parties when a three-way conference call is in progress.
The default is 350@-19;20(.1/.1/1,.1/9.7/1).
Played when a call has been successfully switched to secure mode. It should be played
only for a short while (less than 30 seconds) and at a reduced level (less than -19 dBm) so
it does not interfere with the conversation.
The default is 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2).
Specifies the tone transmitted when the paging feature is enabled.
600@-16;.3(.05/0.05/1)
Played when a feature is implemented. (Not in PAP2T)
The default is 350@-16;*(.1/.1/1).
Description
Cadence script for distinctive ring 1.
The default is 60(2/4).
Linksys 900 Series IP Phone Administrator Guide
Regional Tab
5-19