Dial Plan - Linksys 900 Series Administrator's Manual

Ext 1/2/3/45/6 Tab
G726-24 Enable
FAX CED Detect Enable
G726-32 Enable
G726-40 Enable
DTMF Process INFO
DTMF Process AVT
DTMF Tx Method
Release Unused Codec
References in this section to the SPA3102 also apply to the AG310.
Note

Dial Plan

The default dial plan script for each line is as follows:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.). The syntax for a dial plan
expression is as follows:
Table 5-1
Dial Plan Entry
*xx
[3469]11
0
00
[2-9]xxxxxx
Linksys 900 Series IP Phone Administrator Guide
5-44
To enable the use of the G.726 codec at 24 kbps, select yes. Otherwise, select no.
The default is yes.
To enable detection of the fax Caller-Entered Digits (CED) tone, select yes. Otherwise,
select no.
The default is yes.
To enable the use of the G.726 codec at 32 kbps, select yes. Otherwise, select no.
The default is yes.
To enable the use of the G.726 codec at 40 kbps, select yes. Otherwise, select no.
The default is yes.
(Not in PAP2T) To use the DTMF process info feature, select yes. Otherwise, select no.
The default is yes.
(Not in PAP2T) To use the DTMF process AVT feature, select yes. Otherwise, select no.
The default is yes.
Select the method to transmit DTMF signals to the far end: InBand, AVT, INFO, Auto,
InBand+INFO, or AVT+INFO. InBand sends DTMF using the audio path. AVT sends
DTMF as AVT events. INFO uses the SIP INFO method. Auto uses InBand or AVT based
on the outcome of codec negotiation.
The default is Auto.
This feature allows the release of codecs not used after codec negotiation on the first call,
so that other codecs can be used for the second line. To use this feature, select yes.
Otherwise, select no.
The default is yes.
Dial Plan Script Syntax
Chapter 5 900 Series phone Field Reference
Functionality
Allow arbitrary 2 digit star code
Allow x11 sequences
Operator
Int'l Operator
US local number
Document Version 3.1