Modifying Recorder Settings
Modifying Trigger Settings
Modifying Camera Settings
Rev 1.02
You can modify the HTRD400 Recorder settings on the Recorder Settings dialog box (see
Figure
5-6):
•
On the Task Overview tab, click Configure Recorder ..., or
•
From the Configure menu, select Recorder ...
Note
Most modifications require that you are connected to the recorder. For a
complete list of these tasks, see
You can modify the trigger settings on the Edit Trigger dialog box (see
•
On the Task Overview tab, click Configure triggers ..., highlight the trigger you wish
to change, then click Edit, or
•
From the Configure menu, select Triggers ..., highlight the trigger you wish to
change, then click Edit
Note
Be careful when you modify triggers. For example:
•
Ensure that you have at least one trigger set as a wakeup trigger.
•
A rule that is based on a trigger may not function if that trigger is modified.
You can modify the camera settings on the Camera Edit dialog box (see
•
On the Task Overview tab, click Configure Cameras ..., highlight the camera you
wish to change, and then click Edit, or
•
From the Configure menu, select Cameras, highlight the camera you wish to change,
and then click Edit.
HTRD400 System Reference Guide
Table 5-1
on
75
page
36.
Figure
5-7):
Figure
6-2):
Document 900.0328
05/05