Figure 5-11 Camera Coverage Screen - Honeywell HTRD400 Reference Manual

System Configuration
Rev 1.02
To change the position of a camera, on the Camera Summary, highlight a camera and
click the up or down arrow.
Confirming the Camera Coverage
Click Next to open the Camera Coverage. Use this screen to see the field of view of your
connected camera(s). It may take several seconds to acquire an image from a newly
connected camera.
Figure 5-11 Camera Coverage Screen
Testing the Camera Aim and Focus
If you wish to change the aim and focus of a camera, click Back to return to the Camera
Summary, highlight the camera and then click Edit.
54
Use these arrows to
change camera position
in the quad screen (see
Figure 5-11 below.
To see an enlarged preview,
click Zoom.
To save an image of the current
view (in .jpg format), click
Snap.
Document 900.0328
05/05