Table of Contents
Advertisement
Rev 1.02
3.
Verify the triggers. Be sure to confirm that the wiring is correct by verifying the current
status. Click Next after verifying the status.
4.
On the Camera Summary window, select a camera from the list, and then click Add.
The Camera Edit dialog box displays.
5.
Select a MAC address for the camera from the MAC drop-down box. Enable the audio
for the camera, if desired. Verify that audio and video is from the correct camera
before proceeding. This is particularly important in multi-camera systems. Click OK.
6.
Confirm your changes on the Camera Summary window. When you are satisfied, click
Next.
HTRD400 System Reference Guide
125
If the MAC address shows
as Offline, it indicates
that the camera is not yet
connected to the recorder.
Document 900.0328
05/05
Advertisement
Table of Contents
