Figure 5-13 Rule Summary; Figure 5-14 Rule Configuration Dialog Box - Honeywell HTRD400 Reference Manual

System Configuration
Rev 1.02
Caution The HTRD400 Recorder requires an active, enabled rule to record.
Note You must configure all connected cameras and enable triggers before
defining record rules.
To set up a new record rule:
1. From the GPS Summary, click Next. The Rule Summary displays.
Figure 5-13 Rule Summary
2. Click Add to open the Rule Configuration dialog box.
Figure 5-14 Rule Configuration Dialog Box
56
The Edit and
Remove buttons are
grayed out until a
rule has been
added.
Document 900.0328
05/05