Installing An Optional Rear Cable Cover; Figure 2-13 Optional Cable Cover Installation - Honeywell HTRD400 Reference Manual

Installation

Installing an Optional Rear Cable Cover

Rev 1.02
The optional rear cable cover prevents access to cables at the back of the HTRD400
Recorder. Contact Honeywell Sales to order this product.
Follow Figure 2-13 to install the cable cover.
Note Make sure you leave 1/2 inch minimum clearance between the rear cable
cover and the vehicle chassis.
Figure 2-13 Optional Cable Cover Installation
HTRD400 Recorder
Rear cable cover
(optional)
4-40 x 5/16 pan head
Phillips screws (x4)
26
Note
Leave 1/2 inch
(minimum) clearance
between the cable
cover and the vehicle
chassis.
Document 900.0328
05/05