Table of Contents
Advertisement
PC to HTRD400 Recorder Connection
Connecting a PC to an HTRD400 Recorder
Rev 1.02
This chapter describes how to:
•
Connect a PC or laptop to the HTRD400 Recorder
•
Disconnect a PC from one HTRD400 Recorder and connect to another HTRD400
Recorder
For information on moving a PC from a corporate network and connecting to a HTRD400
Recorder, see
Appendix
C.
Note
In this chapter, the term PC refers to either a PC or a laptop.
Caution
Honeywell does not support connecting the HTRD400 Recorder to a
corporate network.
If you are moving your PC or laptop from a corporate network to a
HTRD400 Recorder, please consult your IT network administrator.
1.
If your PC is not already on, turn it on.
2.
With Windows running, connect your PC to the COMPUTER port on the front panel
of the HTRD400 Recorder using a Honeywell CAT5 Ethernet crossover cable (see
Figure
4-1).
Caution
You must use a CAT5 Ethernet crossover cable.
31
4
Document 900.0328
05/05
Advertisement
Table of Contents
