Table of Contents
Advertisement
The recorder reacts to the record rule at the top of the
list first and ignores all other rules as long as the first
rule conditions are active. To change the rule priority,
select the rule and then click the up or down arrow.
Rev 1.02
The Summary area displays an overview of the record rule based on your
choices. This overview is generated by the Toolbox application.
f.
Click Next to review the configuration summary.
g.
Click Next. Now that you have completed your configuration settings, you should
save the settings (recommended) for future use.
Caution
Your selections are not activated until you upload the Configuration
file to the HTRD400 Recorder (see
an HTRD400
Recorder, page 67).
HTRD400 System Reference Guide
h.
i.
j.
Uploading a Configuration File to
119
Click Save to save the settings
to a file on your PC.
Click Upload to upload the file
to the recorder. This will
overwrite any previously
loaded configuration file.
Click Finish to exit the Setup
Wizard.
Document 900.0328
05/05
Advertisement
Table of Contents
