Record Time Configuration; Table 5-12 Recording Time Configurator - Honeywell HTRD400 Reference Manual

Record Time Configuration

Table 5-12 Recording Time Configurator
Compression QVGA
Extended 6 KB
Good 8 KB
Better 11 KB
Best 14 KB
VGA
Extended 18 KB
Good 22 KB
Better 28 KB
Best 34 KB
a
.1 fps is equivalent to 1 frame every 10 seconds.
Rev 1.02
Notice that the bandwidth changes, depending on your image quality, resolution, and
FPS settings. The Estimated Recording Time field shows the approximate recording
time based on this schedule.
Note The total limit for all cameras (shared by all connected cameras) is up to 60
QVGA or 30 VGA. These approximate limits depend on resolution,
compression, and scene content.
How quickly your hard drive storage will fill depends on your camera resolution and
recording speed settings (see
recording times based on a 40 GB hard drive capacity and 4 channels of audio recorded
with four connected video cameras.
Approximate hours of recording (storage) time
a
.1 fps 1 fps 5 fps
4521.0 1808.4 175.0
3390.0 1356.3 150.7
2466.0 986.4 124.7
1937.0 775.0 106.3
1507.0 602.7 89.0
1233.0 493.2 71.3
968.7 387.5 63.1
797.5 319.1 53.7
Note The fps values in
cameras.
Audio is not available for cameras configured with a fractional fps
setting (.1, .2, .5 fps).
HTRD400 System Reference Guide
Table 5-11). Table 5-12 provides a quick reference for
10 fps 15 fps 20 fps
117.9 88.9 71.4
96.8 71.4 56.5
76.4 55.1 43.1
63.1 44.8 34.7
51.2 35.9 27.6
39.9 27.6 21.2
34.7 24.0
29.2 34.5
Table 5-12 are an aggregate of all configured
63
30 fps 35 fps 40 fps
51.1 44.8 39.8
39.9 34.7 30.8
30.0 26.0
24.0
19.0
Document 900.0328
05/05