Debug Ip Bgp Show Interface - D-Link DXS-3600-16S Manual

Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp show damp
Route Map
Reach Half Life Time is
Reuse Value
Suppress Value
MAX Suppress Time
Unreach Half Life Time is
Reuse Index Size
Reuse List Size
Reuse Offset
Current dampened routes:
Damp Hinfo: 484d9be8
index ptr event
f5 484d9be8 1
f5 484d9b98 1
f5 484d8080 1
f5 484d7fe8 1
Damp Reuse List Info:
reuse_index index ptr penalty
Damp reuse Hinfo: 484d9be8
245 1 484d9be8
245 2 484d9b98
245 3 484d8080
245 4 484d7fe8
show BGP Damp no reuse list info: 0
index ptr penalty flap
BGP Damp Decay List Info:
decay array size is 90.
Index value
-----------
1 1
2 0.969663
3 0.940247
4 0.911722
5 0.884064
6 0.857244
7 0.831238

7-106 debug ip bgp show interface

This command is used to show internal detailed information about the BGP interface.
debug ip bgp show interface
Parameters
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Level: 15. (EI Mode Only Command)
Use this command to check internal status and detailed information of BGP route
damping.
This example shows how to display internal detail information about BGP route
damping.
: NULL
: 900 seconds
: 750
: 2000
: 3600 seconds
: 900 seconds
: 1024
: 256
: 19
penalty binfo
1392 484d9ad8 484d9a90
1392 484d9a00 484d99b8
1392 484d9928 484d98e0
1392 484d9808 484d9738
flap
5010
5010
5010
5010
start_time t_updated
<Output continues...>
None.
None.
Privileged Mode.
Level: 15. (EI Mode Only Command)
rn
start_time t_updated
6 428
6 428
6 428
6 428
suppress_time evt
168
suppress_time evt
448 437 1
448 437 1
448 437 1
448 437 1