Garp Vlan Registration Protocol (Gvrp) Commands - D-Link DXS-3600-16S Manual

GARP VLAN Registration Protocol (GVRP) Commands

22-1 clear gvrp statistics interface
This command is used to clear the statistics for a GVRP port.
clear gvrp statistics [interface INTERFACE-ID [, | -]]
Parameters
INTERFACE-ID
,
-
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#clear gvrp statistics
DXS-3600-32S#
22-2 gvrp (Global)
This command is used to enable the GVRP function globally, and use the no gvrp command to disable the GVRP
function globally.
gvrp
no gvrp
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#gvrp
DXS-3600-32S(config)#
22-3 gvrp (Interface)
This command is used to enable the GVRP function on a port, and use the no gvrp command to disable the GVRP
function on a port.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the interface to clear. If no interface is specified the statistics on
all interfaces will be cleared.
(Optional) Specifies a series of interfaces, or separate a range of interfaces from a
previous range.
(Optional) Specifies a range of interfaces.
None.
Privilege EXEC Mode.
Level: 12
This command clears the GVRP counters. If the INTERFACE-ID is not specified,
then all GVRP counters will be cleared.
This example shows how to clear statistics on all interfaces.
None.
By default, this option is disabled.
Global Configuration Mode.
Level: 12
The user should enable the global GVRP state and individual port's GVRP state and
start GVRP on the port. Once the GVRP is enabled globally, the GVRP PDU will be
captured to CPU to process. Otherwise, the GVRP will be forwarded in the port-
based VLAN of the reception port.
This example shows how to enable the GVRP protocol global state.
251