Show Ip Rpf - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show ip mroute 239.0.0.5 20.2.2.10
(20.2.2.10, 239.0.0.5), 00:02:53/00:00:37, flags: VP
Incoming interface: vlan20, RPF Neighbor 2.3.0.1
Outgoing interface List: NULL
Total Entries: 1
DXS-3600-32S#
Example
DXS-3600-32S#show ip mroute static
Mroute: 10.0.0.0/8, RPF neighbor: 11.1.1.1
Mroute: 11.0.0.0/8, RPF neighbor: NULL
Total Entries : 2
DXS-3600-32S#
Display Parameters
D – Dense
S – Sparse
s – SSM Group
V – DVMRP
F – Register Flag
P – Pruned
R – (S, G) RPT-bit set
T – SPT-bit set
W – Assert winner
(172.18.16.1, 235.0.0.0)
Uptime/Expire
RPF neighbor

29-4 show ip rpf

This command is used to show the RPF information for the specified source address.
show ip rpf SOURCE-ADDRESS
Parameters
SOURCE-ADDRESS
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display IP multicast routing information for group source
part (239.0.0.5, 20.2.2.10).
This example shows how to display the multicast static routes created on the
system.
Description
The entry is operating in PIM-DM mode.
The entry is operating in PIM-SM mode.
The entry is a member of an SSM group.
The entry is operating in DVMRP mode.
Status of whether the software is registering for a multicast source.
Route has been pruned. This information indicates that this switch has no outgoing
for this group.
Specify this switch is the RPT upstream for this group, and this group is forwarding in
SPT. The downstream switch has sent (S, G) prune message to this switch.
Status of whether the packets have been received on the shortest-path tree.
Specify this outgoing is in assert state, and it is a assert winner.
The source address and group address for this entry.
The uptime and expire time for this entry.
The RPF neighbor address for the specified network address, as specified by
command "ip mroute".
Specifies the source IP address.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
297