Show Ip Dvmrp Neighbor - D-Link DXS-3600-16S Manual

Display Parameters
Interface
IP Address
Generation ID
Metric
State

15-4 show ip dvmrp neighbor

This command is used to display DVMRP neighbor information.
show ip dvmrp neighbor [IFNAME]
Parameters
IFNAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip dvmrp neighbor
Interface Neighbor Address
--------------- ----------------
vlan1 10.48.74.123
vlan2 172.18.1.2
Total Entries : 2
DXS-3600-32S#
Example
DXS-3600-32S#show ip dvmrp neighbor vlan1
Interface Neighbor Address
------------- ----------------
vlan1 10.90.90.2
Total Entries: 1
DXS-3600-32S#
Display Parameters
Interface
Neighbor Address
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
Specifies the interface name.
The IP address of the interface.
Specifies the generation ID of this interface. This value is dynamically generated by
the switch, and it is used for the neighbor to detect that whether the switch has
restarted or not
The metric value of the interface, which is configured by command "ip dvmrp metric".
Specifies the DVMRP interface state, which is configured by command "ip dvmrp"
Specifies an interface name.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
This command is used to display DVMRP neighbor information. If no interface name
is specified, this command will display DVMRP neighbor information on all
interfaces.
This example shows how to show all DVMRP neighbor information.
Generation ID
-------------
1368354259
1368355860
This example shows how to show neighbor information of interface 'vlan1'.
Generation ID
-------------
1368355860
Description
Specify the interface name.
Specify the neighbor's address of the specified interface.
Expire Time
-----------
00:00:32
00:00:05
Expire Time
-----------
00:00:31
222