Debug Ip Bgp Show Aggregate; Debug Ip Bgp Show Damp - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#debug ip bgp show network
Network Route Map
------------- -----------
192.168.0.0/16 NULL
172.16.0.0/16 map1
Total Entries :2
DXS-3600-32S#

7-104 debug ip bgp show aggregate

This command is used to show internal detailed information about the BGP route aggregation.
debug ip bgp show aggregate [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp show aggregate
Network
-------------
192.168.0.0/16
172.16.0.0/16
Total Entries :2
DXS-3600-32S#

7-105 debug ip bgp show damp

This command is used to show internal detailed information about BGP route damping.
debug ip bgp show damp [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
Command Mode
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display internal detailed information about the BGP
network.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
None.
Privileged Mode.
Level: 15. (EI Mode Only Command)
Use this command to check internal status and detailed information of the BGP route
aggregation.
This example shows how to display internal detailed information about the BGP
route aggregation.
Summary Only AS Set
------------ ------
YES NO
NO NO
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
None.
Privileged Mode.
Suppress Count
-------------
0
2
167