Ip Igmp Snooping Mrouter - D-Link DXS-3600-16S Manual

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#vlan 1
DXS-3600-32S(config-vlan)#ip igmp snooping fast-leave
DXS-3600-32S(config-vlan)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#vlan 1
DXS-3600-32S(config-vlan)#no ip igmp snooping fast-leave
DXS-3600-32S(config-vlan)#

24-3 ip igmp snooping mrouter

This command is used to configure the specified interface(s) as the multicast router interface(s) or as forbidden to be
multicast router interface(s) on the switch. Use the no form of this command to remove the interface(s) from multicast
router interface(s) or forbidden multicast router ports.
ip igmp snooping mrouter [forbidden] {interface INTERFACE-TYPE INTERFACE-ID [, | -] | port-channel
GROUP-ID}
no ip igmp snooping mrouter [forbidden] {interface INTERFACE-TYPE INTERFACE-ID [, | -] | port-channel
GROUP-ID}
Parameters
forbidden
INTERFACE-TYPE
INTERFACE-ID
,
-
GROUP-ID
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#vlan 1
DXS-3600-32S(config-vlan)#ip igmp snooping mrouter interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-vlan)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#vlan 1
DXS-3600-32S(config-vlan)#ip igmp snooping mrouter port-channel 5
DXS-3600-32S(config-vlan)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to enable the IGMP Snooping fast leave function.
This example shows how to disable IGMP Snooping fast leave.
Specifies an interface that cannot be multicast router interface.
Specifies the interface type. Possible valid value is tenGigabitEthernet.
Specifies the port number.
Specifies a series of ports, or separate a range of ports from a previous range. No
space before and after the comma.
Specifies a range of ports. No space before and after the hyphen.
Specifies the port-channel number.
None.
Interface Configuration Mode.
Level: 8
This command specifies the interfaces to be static multicast router interfaces or to be
forbidden router interfaces.
To verify your configuration, use show ip igmp snooping mrouter.
This example shows how to configure interface 1 to be static multicast router
interface on VLAN 1.
This example shows how to configure port-channel 5 as the static multicast router
interface on VLAN 1.
267

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents