Peripheral Commands - D-Link DXS-3600-16S Manual

Peripheral Commands

42-1 show system-info
This command is used to show system information.
show system-info
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show system-info
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
Firmware Type
Serial Number
System Name
System Location
System Uptime
System Contact
DXS-3600-32S#
42-2 show device-status
This command is used to show the device status.
show device-status
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
None.
Privileged EXEC Mode.
Level: 3
This command shows the system information.
This example shows how to show the system information.
: DXS-3600-32S TenGigabit Ethernet Switch
: 00-01-02-03-04-00
: 0.0.0.0 (Manual)
: default
: 0.0.0.0
: 0.0.0.0
: Build 1.10.007
: Build 1.10.023
:
: EI
: D1234567890
:
:
: 0 days, 0 hours, 0 minutes, 41 seconds
:
None.
None.
Privileged EXEC Mode.
Level: 3
This command shows the device's status about the temperature, fan and power. It
includes the temperature log state. This command also shows the working state of
the power and fan.
419