Show Ip Multicast Interface - D-Link DXS-3600-16S Manual

Usage Guideline
Example
DXS-3600-32S#show ip rpf 10.0.0.1
Source IP:10.0.0.1
RPF interface: vlan1
RPF type: unicast
metric: 1
DXS-3600-32S#
Example
DXS-3600-32S#show ip rpf 20.0.0.1
Source IP:20.0.0.1
RPF interface: vlan3
RPF type: unicast
metric: 4
DXS-3600-32S#
Example
DXS-3600-32S#show ip rpf 30.0.0.1
Source IP:30.0.0.1
RPF interface: vlan2
RPF type: unicast
metric: 2
DXS-3600-32S#
Example
DXS-3600-32S#show ip rpf 172.18.61.8
Source IP:172.18.61.8
RPF address: 192.18.16.1
RPF type: Static
DXS-3600-32S#
Display Parameters
Source IP
RPF interface
Type
Metric
RPF address

29-5 show ip multicast interface

This command is used to display the basic multicast information of an interface.
show ip multicast interface [IFNAME]
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command is used to display the RPF information of the specified source
address. The static multicast routing information, which created by command ip
mroute, prefer than RPF information learnt by unicast routing protocol.
This example shows how to display RPF information of 10.0.0.1
This example shows how to display RPF information of 20.0.0.1
This example shows how to display RPF information for 30.0.0.1
This example shows how to display RPF information of 172.18.61.8
Description
Indicate the source IP address.
Indicate the RPF interface name for the specified source address.
Specify the way the switch gets the RPF information. It can be unicast routing
protocol or static configured.
The metric to achieve to the source network from the local switch.
Specify RPF neighbor address, created by command "ip mroute".
298