Debug Ip Ospf Clear Counter - D-Link DXS-3600-16S Manual

Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf show counter
OSPF Debug Statistic Counters
Packet Receiving:
Total : 5
Hello : 5
DD : 0
LSR : 0
LSU : 0
LSAck : 0
Drop : 0
Auth Fail : 0
Packet Sending:
Total : 5
Hello : 5
DD : 0
LSR : 0
LSU : 0
LSAck : 0
Neighbor State:
Change : 3
SeqMismatch : 0
SPF Calculation:
Intra : 1
Inter : 1
Extern : 1
DXS-3600-32S#

40-44 debug ip ospf clear counter

This command is used to reset the OSPF statistic counter.
debug ip ospf clear counter [packet | neighbor | spf]
Parameters
packet
neighbor
spf
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf clear counter
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Level: 15. (EI Mode Only Command)
Use this command to check statistic information about the OSPF packet, neighbor
and SPF calculation.
This example displays all OSPF statistic counters.
Specifies to reset the OSPF packet counter.
Specifies to reset the OSPF neighbor counter.
Specifies to reset the OSPF SPF event counter.
None.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to reset the OSPF statistic counter. After reset, the specified
counter will change to 0.
This example shows how to reset all OSPF statistic counters.
413