Show Ip Bgp - D-Link DXS-3600-16S Manual

7-68 show ip bgp

This command is used to display entries in the Border Gateway Protocol (BGP) routing table.
show ip bgp [{IP-ADDRESS | NETWORK-ADDRESS [longer-prefixes]}]
Parameters
IP-ADDRESS
NETWORK-ADDRESS
longer-prefixes
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp
BGP Local Router ID is 10.90.90.10
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
IP Address/Netmask
*> 10.0.0.0/8
DXS-3600-32S#
Example
DXS-3600-32S#show ip bgp 172.18.0.0/16 longer-prefixes
BGP Local Router ID is 10.90.90.10
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
IP Address/Netmask
*> 172.18.0.0/16
*> 172.18.2.0/16
*> 172.18.3.0/16
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the IP address entered to filter the output to display only a
particular host or network in the BGP routing table.
(Optional) Specifies the network address and the sub-network mask. For example,
120.25.0.0/16
(Optional) Displays the specified route and all more specific routes.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
The show ip bgp command is used to display the contents of the BGP routing table.
When one bgp route's as path information filed carried more than 160 characters,
this command will not show the totally information, and the command of show ip
bgp NETWORK-ADDRESS can show the full information of this route especially the
as path.
This example shows how to show the BGP routing table.
Gateway
0.0.0.0
This example shows how to show the BGP routing which network address is
172.18.0.0/16 and includes longer prefixes.
Gateway
10.90.1.1
10.90.1.1
10.90.1.1
Metric LocPrf
1
Metric LocPrf
1 32768
1 32768
1 32768
117
Weight Path
32768 ?
Weight Path
100 200 ?
100 200 ?
100 200 ?