Debug Show Tech-Support - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch CLI Reference Guide
Command Mode
EXEC Mode.
Any Configuration Mode.
Usage Guideline
Use this command to display the best routes that are currently at work.
Example
This example shows how to display the IPv6 routing table.
Switch#show ipv6 route
IPv6 Routing Table
Code: C - connected, S - static
SLAAC - Stateless address autoconfiguration
C 200::/64 [0/1] is directly connected, vlan1
Total Entries: 1 entries, 1 routes
Switch#
This example shows how to display the IPv6 database routing table.
Switch#show ipv6 route database
IPv6 Routing Table
Code: C - connected, S - static
SLAAC - Stateless address autoconfiguration
> - selected route, * - valid route
C *> 200::/64 [0/1] is directly connected, vlan1
Total Entries: 1 entries, 1 routes
Switch#
2-30

debug show tech-support

This command is used to display the information required by technical support personnel.
debug show tech-support
Parameters
None.
Default
None.
Command Mode
EXEC Mode.
Any Configuration Mode.
30