Factory Reset; Figure 2-16 Factory Reset Switch - Honeywell HRXDS16D1T User Manual

A USB mouse (not supplied) can be connected to one of the ports. You can use the
mouse to navigate through the screens and menus much like you would on a computer.
A USB printer (not supplied) can be connected to one of the ports. You can print
selected images resulting from a search (see
A USB to Serial converter can be connected to the USB port. Multiple text-in devices
can be used with a USB to Serial converter.

Factory Reset

Factory reset switch
The DVR has a Factory Reset switch to the left of the USB port on the rear panel. This
switch will only be used on the rare occasions that you want to return all the settings to
the original factory settings.
Caution
To reset the unit, you will need a straightened paperclip:
1.
2.
3.
4.
5.
34
Figure 2-16
When using the Factory Reset, you will lose any settings you have
saved.
Turn the DVR off.
Turn it on again.
While the DVR is initializing, the front panel LEDs will blink. When any of the
Camera 1 to 8 LEDs blink, poke the straightened paperclip in the unlabeled hole
to the left of the USB port.
Hold the switch until all the LEDs on the front panel are lit.
Note When the DVR successfully resets to factory defaults all the LEDs
on the front panel flash five times.
Release the reset switch. All of the DVR's settings are now at the original settings it
had when it left the factory.
Searching
Factory Reset Switch
HRXDS Series DVR User Guide
Video, on page 116.