Recording Video - Honeywell HRXDS16D1T User Manual

Recording Video

After you have installed the DVR following the instructions in
ready to record. The DVR will start recording based on the settings you made in the
Record setup screen. See
Recycle On or Recycle Off
recording over the oldest video after the hard disk is full. Setting the DVR to Recycle Off
causes it to stop recording after the hard disk is full.
Standard (CIF), High (2 CIF) or Very High (4 CIF)
Standard. When set to Standard, the DVR has a maximum recording speed of 240 ips.
When set to High, the DVR has a maximum recording speed of 120 ips. When set to
Very High, the DVR has a maximum recording speed of 60 ips.
Press the PANIC button to start panic recording of all cameras. Press PANIC again to
stop panic recording. If you set the Panic Recording Duration in the Record Screen,
panic recording will stop automatically according to the preset duration as long as the
PANIC button is not pressed.
Although you will be able to record without changing the unit from its original factory
settings, you will want to take advantages of the DVR's many tools. See
Configuration
112
b. Then, click the right mouse button to display the menu.
If you select another camera in the menu (for example, Camera B), the screen
displays Camera B instead of Camera A.
When in the 4x4 format, Camera A and Camera B will switch positions.
Note When the DVR is not in the Recycle mode and all available
storage space has been used, panic recording will not operate.
for detailed descriptions of the recording mode options.
Chapter 3, Configuration.
The factory default is Recycle On. It does this by
HRXDS Series DVR User Guide
Chapter 2, Installation, it is
The factory default resolution is
Chapter 3,