Schedule Screen - Honeywell HRXDS16D1T User Manual

Configuration
6.
7.
8.
9.
10. To save your Record settings, highlight Save, then press #.

Schedule Screen

1.
Document 800-04559 Rev D
11/09
Note When the storage device does not have enough space to record
video data longer than the preset Limit Time-Lapse Recording
period, the DVR records over the oldest video data (time-lapse or
event video) as it would in the Recycle mode even if this feature
is turned On.
Note The maximum storage time is only an estimate because the
amount of space required to store video varies depending on
many factors such as motion and image complexity.
Highlight Use Panic Recording, then press # to toggle between On and Off.
Highlight the Panic Recording - Duration box and set the duration of panic
recording (from 5 minutes to 1 hour). Panic recording stops automatically after the
preset duration unless panic was toggled Off (by pressing the PANIC button) in
advance of the panic recording duration time-out.
Select No Limit if you want to stop panic recording manually.
Highlight Panic Recording - ips, then press # to set the images per second for
Panic recording, from 1.00 to 30.00 ips (25.00 ips PAL).
Highlight Panic Recording - Quality, then press # to set the recorded image
quality for Panic recording. You can select from: Very High, High, Standard and
Low.
Select Cancel to exit the screen without saving the changes.
In the Record menu (see
Schedule setup screen appears.
3-48), highlight Schedule, then press #. The
Figure
79