Notification Setup; Figure 3-31 Notification Mail Setup Screen - Honeywell HRXDS16D1T User Manual

Configuration

Notification Setup

The DVR can be set up to send an e-mail or to contact a computer running RAS
(Remote Administration System) when an event occurs. On the Notification Mail Setup
screen, you can configure the mail and callback settings.
1.
2.
3.
4.
5.
6.
Document 800-04559 Rev D
11/09
In the Network menu (see
Notification screen displays.
Figure 3-31
Highlight Enable, then press # to toggle between On and Off. You will only be
able to change the settings if Mail is enabled.
Highlight the box beside SMTP Server, then press #. A virtual keyboard appears
that you can use to enter the IP address or domain name of the SMTP server.
Note You will need to get the IP Address or domain name of the SMTP
Server from your network administrator.
Note You can use the domain name instead of IP address if you
already set up the DNS Server when setting up the LAN.
Highlight the box beside Port, then press #. Use the arrow buttons to enter the
SMTP Server port number obtained from your system administrator. The default
port number is 25.
Highlight Use SSL/TLS, then press # to toggle between On and Off. When it is
On, the DVR can send an e-mail via an SMTP server requiring SSL (Secure
Sockets Layer) authentication.
Highlight the box beside Authentication, then press #. An Authentication screen
appears (see Figure 3-32).
Highlight Use, then press # to toggle between On and Off.
a.
3-23), highlight Notification, then press #. The
Figure
Notification Mail Setup Screen
65