Go To; Figure 4-12 Go To Menu; Figure 4-13 Go To The Date/Time Screen - Honeywell HRXDS16D1T User Manual

Operation

Go to

1.
2.
3.
Document 800-04559 Rev D
11/09
Menu Option
De-Interlace
Slow Play ...
Data Source
Exit Search
Note The searching speed might decrease when all camera channels
are in the pre-alarm recording mode.
Figure 4-12
Select First to display the first recorded image or select Last to display the last
recorded image.
Select Date/Time to display the Go to the Date/Time screen.
Figure 4-13
Move the cursor over the date and time, then press #.
Description
Turns the de-interlace filter on.
Note The video signal has a time difference of 1/60
second (1/50 second for PAL) between odd
and even fields because it is composed of 60
interlaced fields per second (50 fields for PAL).
When recording video with Very High (4 CIF)
resolution, video is made up of frame units
combining two fields - one odd field and one
even field. This can cause horizontal scan lines
or flashes in areas with motion because of the
time difference between the two fields. Turning
on the de-interlace filter provides clearer video
by eliminating these horizontal scan lines and
flashes.
Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and
x1/8).
Allows you to choose between recorded and archived
video.
Exits the Search menu.
Go to Menu
Go to the Date/Time Screen
117