Honeywell HRXDS16D1T User Manual page 128

2.
3.
4.
5.
Caution
6.
128
When set to On, the search will be from the first recorded image.
Highlight the box beside To, then press # to toggle between On and Off.
When set to Off, you can enter a specific Date and Time.
When set to On, the search will be from the last recorded image.
Highlight the box beside Channels, then press #. You can select the cameras that
you would like to include in your video clip.
Highlight the box beside Password, then press #. A virtual keyboard appears
allowing you to enter the password for reviewing the video clips.
Highlight the box beside Dest., then press #. You can select the storage device
on which you would like to record the video clip. You can choose from Internal
DVD RW, USB Storage and USB CD-RW.
The USB device for clip copy must be FAT 16 or FAT32 format.
Note While copying video clips on the CD-RW or DVD RW, the
recording speed might decrease.
Note While copying video clips on the CD-RW or DVD RW, the DVR
will stop archiving video data until clip copy is finished.
When the error message Firmware update of the
Note
optical drive is required displays, update the firmware
of the installed DVD RW drive. Please follow the instructions
described in
The DVR automatically assigns a file name to the video clip. However, you can
give the video clip file a different name. Highlight the box beside File Name, then
press #. A virtual keyboard appears. Enter a file name for the video you are
backing up and select Close. The DVR will automatically add the camera number
(for example, 01) and .exe to the file name.
Note When naming a file, you cannot use the following characters: \, /,
:, *, ?, ", <, >, |.
HRXDS Series DVR User Guide
System Information, on page 44.