Figure 3-46 Remote Control Setup Screen; Figure 3-47 Printer Setup Screen - Honeywell HRXDS16D1T User Manual

Remote Control Screen
1.
2.
3.
4.
5.
Printer Screen
1.
76
In the Device menu (see
the Remote Control setup screen to select a port and set up a remote keyboard.
Figure 3-46
Highlight the box beside Port and select from None, RS232 and RS485. If the
RS232 port and RS485 port are in use for PTZ control, networking or text input,
the remote keyboard cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop
Bits for the device you are connecting to the DVR.
Highlight the box beside Remote Control Product and select the device from the
list.
To save your Remote Control settings, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
In the Device menu (see
setup screen appears.
Figure 3-47
3-34), select Remote Control, then press #. Use
Figure
Remote Control Setup Screen
3-34), highlight Printer, then press #. The Printer
Figure
Printer Setup Screen
HRXDS Series DVR User Guide